Samsung Galaxy s4 Secret Codes,New Galaxy S Four Hidden Code

Here i am going to show you how to access the internal function of Galaxy S4 for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test lcd, vibration, camera, sensor (accelerometer sensor, proximity sensor, magnetic sensor), touch screen, speaker, sub key, etc… if you have any hardware problem with your Galaxy S4 you can identify with this code if it is working or not to do this follow the steps below.
First of all open your keypad

Then dial the secret code *#0*#. Now you get a screen with title LCD TEST and below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
To go back use right physical button
while testing the touch you have to touch and mark all the squares back button does not work
Other use full secret codes for android phone tested on Galaxy S4

  • * #1234# to check software version of phone.
  • *#12580*369# to check software and hardware information.
  • *#0228# Battery status (ADC, RSSI reading)
  • *#32489# Service mode
  • *#7780# factory data reset galaxy S4
  • *2767*3855# Full factory reset (Don’t dial it does not ask you to confirm unless you have problem)

These codes will work on all the models of galaxy series.

12 thoughts on “Samsung Galaxy s4 Secret Codes,New Galaxy S Four Hidden Code

  • May 23, 2013 at 12:06 am
    Permalink

    Great info and all codes provided work well on Samsung galaxy s 4.

    Thank you.

    -38life-

    Reply
  • May 23, 2013 at 3:49 am
    Permalink

    Last three codes didn't work for me. Service mode is *#0011# on my phone. I'm still looking for factory reset.

    Reply
  • June 6, 2013 at 6:56 pm
    Permalink

    Can’t pass service mode initial image, when chose back then key input and 1 it stays on the same menu 🙁

    Reply
  • July 19, 2013 at 7:03 am
    Permalink

    Just to add some points:

    *#0*# – Testing mode
    *#06# – Show the IMEI number of your phone
    *2767*4387264636# – show the product code
    *#0011# – Service Menu
    *#0228# – Battery status (ADC, RSSI reading)
    # 7353 # – Quick test menu)

    Reply
  • September 1, 2013 at 12:47 am
    Permalink

    *#32489# doesnt not work on t-mobile version (sgh-m919) instead its *#27663368378#

    Reply
  • December 28, 2013 at 11:37 pm
    Permalink

    i guess the phone needs to be rooted to use these codes…none work on my s4…it just trys to dial

    Reply
  • March 20, 2014 at 12:10 am
    Permalink

    I am getting nowhere with this issue after typing in *#0*# nothing happens

    Reply
  • March 20, 2014 at 4:48 pm
    Permalink

    No Joseph its not important that your phone should be rooted. These codes are working fine on non rooted phone

    Reply
  • March 20, 2014 at 4:52 pm
    Permalink

    Hello terry *#0*# is the most basic code for all samsung mobiles and it works on samsung galaxy s4 just make sure you are typing it correctly

    Reply
  • April 18, 2014 at 3:14 pm
    Permalink

    No codes work on my Galaxy S4, nothing. And, no, I'm not typing *#0*# wrong.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *